Roscamat 400; Capacity M2-M24 (M27)

The machine, which can be easily fastened to a work bench or table using three M8 screws or a simple fastening clamp, consists of a radial arm with a 360º turning radius. It is connected to a vertically moving swivel arm that always maintains perpendicularity to the reference plane – which is the machine support surface. It is equipped with a pneumatic motor that includes an air unit (lubricator + filter + regulator) for correct operation. The modular system consisting in a series of 7 quick-change modules (reducers) is provided for coupling to said motor. As a result of this 7 output speeds (90, 170, 300, 550, 750, 1050 and 2100 rpm) are available thus allowing to adapt the tap speed to every type of thread. The handle allows to balance the tilting arm and to position it at the operator’s convenience. The modular system admits the quick-change tap holders with or without safety clutch depending on the intended job (blind or through holes). Thread capacity from M2 up to M24 (M27)

Roscamat 400 VH

The ROSCAMAT 400 can be supplied with an articulated head – C43 -. This bracket of easy handling can be set in four different positions 90º apart.

Working Areas

Roscamat 400: Radius 1100 mm. Height: 680 + 140 mm.
Roscamat 400 VH: Radius 1220 mm Height: 680 + 140 mm.

Quick-change Toolholder

A wide range of tapholders, all of them with clutch and without it, apart from other quick holding fixtures for different tools, such as drills, sinking tools, threading dies, socket wrenches, etc are available. · Toolholder with safety clutch:so that it slips when it reaches the hole bottom. Type-1 Ø 19 capacity range M2-M16 (for modules 300, 550, 750, 1050) Type-2 Ø 31 capacity range M14-M27 (for modules 90 and 170) · Toolholder without clutch: for holding different tools with a cylindrical shank and driving cube. Type-1 Ø 19 capacity range M2-M16 (for modules 300, 550, 750, 1050) Type-2 Ø 31 capacity range M14-M27 (for modules 90 and 170)

Modular system

The modular system provides for a new concept in the use of articulated armed threading machines. Driven from a single motor, seven different speed modules are available with their relevant power torques. The seven quick-change speed modules provide the speed and torque for each threading type, from M2 to M24 (M27) threads

Module V.max. (rpm) Max. Torque (Nm) Coupling diameter Max. Thread Aluminio Cast Irons Max Thread Steel <80Kg. Max Thread Steel >80Kg.
90 90 150 Ø 31 M27 M24 M22
170 170 79 Ø 31 M22 M18 M16
300 300 44 Ø 19 M16 M16 M14
550 550 24 Ø 19 M14 M12 M10
750 750 17 Ø 19 M12 M10 M8
1050 1050 12.5 Ø 19 M8 M8 M6
2100 2100 6 Con B-16 To drill up to Ø 8 Aluminium, brass, etc.

Automatic tap lubrication (OPTIONAL)

All ROSCAMAT units (400, 500 i 500RH) can be supplied with automatic tap lubrication system. The system is comprised of a regulating valve and a lubricant reservoir, and is actuated by the compressed-air system itself. When starting to tap the oil or liquid flow rate can be regulated for the purpose of lubricating the tap during the operation.

Accessories

tapholder-w-clutch.jpg
Tapholders diam.19/1 with clutch M2-M16 (unit)
tapholder-without-clutch.jpg
Tapholders diam.19/1 without clutch M3-M16 (unit)
tapholder-w-clutch.jpg
Tapholders diam.31/2 with clutch M6-M30 (unit)
tapholder-without-clutch.jpg
Tapholders diam.31/2 without clutch M6-M30 (unit)
dieholder.jpg
Dieholder M5-M12 19/1 (unit/size)
dieholder.jpg
Dieholder M16-M20 31/2 (unit/size)
long-dieholder.jpg
Long dieholder M6-M12 19/1 (unit/size)
quick-change-extension.jpg
Quick change extension
reducer-cup.jpg
Reducer cup 31-19
reducer-cup.jpg
Reducer cup 19-13
brida-gran.jpg
Clamp
mesa-700.jpg
Table 850×850
mesa-1100.jpg
Table 1100×850
trolley.jpg
Trolley
column.jpg
Column
lifter.jpg
Pneumatic lifter
lifter.jpg
Mechanic lifter
magnetic-support.jpg
Magnetic support (Ø250)
arm-extension.jpg
Arm extension support (1 m.)